258 DHCP Layer 2 Relay Commands
dhcp l2relay remote-id
Use the dhcp l2relay remote-id command to enable setting the DHCP
Option 82 Remote ID for a VLAN. When enabled, the supplied string is used
for the Remote ID in DHCP Option 82. Use the "no" form of this command
to disable setting the DHCP Option 82 Remote ID.
Syntax
dhcp l2relay remote-id
remoteId
vlan
vlan-range
no dhcp l2relay remote-id
remoteId
vlan
vlan-range
•
remoteId
—The string to be used as the remote ID in the Option 82
(Range: 1 - 128 characters).
Default Configuration
Setting the DHCP Option 82 Remote ID is disabled by default.
Command Mode
Global Configuration.
User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay remote-id dslforum vlan
10,20-30