110 Command Groups
passive-interface (router
mode)
Sets the interface or tunnel as passive. ROSPF
redistribute Configures OSPF protocol to allow redistribution
of routes from the specified source
protocol/routers.
ROSPF
router-id Sets a 4-digit dotted-decimal number uniquely
identifying the router OSPF ID.
ROSPF
router ospf Enters Router OSPF mode. GC
show ip ospf Displays information relevant to the OSPF
router.
PE
show ip ospf abr Displays the internal OSPF routing table entries
to Area Border Routers (ABR).
PE
show ip ospf area Displays information about the identified OSPF
area.
PE
show ip ospf asbr Displays the internal OSPF routing table entries
to Autonomous System Boundary Routes
(ASBR).
PE
show ip ospf database Displays information about the link state
database when OSPF is enabled.
PE
show ip ospf database
database-summary
Displays the number of each type of LSA in the
database for each area and for the router.
PE
show ip ospf interface Displays the information for the IFO object or
virtual interface tables.
PE
show ip ospf interface
brief
Displays brief information for the IFO object or
virtual interface tables.
PE
show ip ospf interface
stats
Displays the statistics for a specific interface. PE
show ip ospf neighbor Displays information about OSPF neighbors. PE
show ip ospf range Displays information about the area ranges for
the specified area-id.
PE
show ip ospf statistics Displays information about recent Shortest Path
First (SPF) calculations.
PE
show ip ospf stub table Displays the OSPF stub table. PE
Command Description Mode*