444 Port Channel Commands
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel
information.
Syntax Description
show interfaces port-channel [
port-channel number
]
•[
port-channel-number
]
—
Number of the port channel to show. This
parameter is optional. If the port channel number is not given, all the
channel groups are displayed. (Range: Valid port-channel number, 1 to 48)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Example
Console#show interfaces port-channel
Channel Ports Hashing-mode
------- ---------------------------------- ------------
ch1 Active: 1/e1, 2/e2 1
ch2 Active: 2/e2, 2/e7 Inactive: 3/e1 2
ch3 Active: 3/e3, 3/e8 3 <default>
ch4 No Configured Ports 5
ch5 No Configured Ports 6
ch6 No Configured Ports 4
ch7 No Configured Ports 3 <default>
ch8 No Configured Ports 3 <default>