876 OSPF Commands
distribute-list out
Use the distribute-list out command in Router OSPF Configuration mode to
specify the access list to filter routes received from the source protocol. Use
the no form of the command to remove the specified source protocol from
the access list.
Syntax
distribute-list
accesslistname
out {rip|static
\
connected}
no distribute-list
accesslistname
out {rip|static
\
connected}
•
accesslistname
— The name used to identify an existing ACL. The range is
1–31 characters.
•
rip
— Apply the specified access list when RIP is the source protocol.
•
static
— Apply the specified access list when packets come through the
static route.
•
connected
— Apply the specified access list when packets come from a
directly connected route.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example specifies the access list to filter routes received from
the RIP source protocol.
console(config-router)#distribute-list ACL40 out rip