ACL Commands 215
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode or Interface Configuration (Ethernet, VLAN or
Port Channel) mode
User Guidelines
An optional sequence number may be specified to indicate the order of this
access-list relative to the other access-lists already assigned to this interface
and direction. A lower number indicates higher precedence order. If a
sequence number already is in use for this interface and direction, the
specified access-list replaces the currently attached access list using that
sequence number. If the sequence number is not specified for this command,
a sequence number is selected that is one greater than the highest sequence
number currently in use for this interface and direction.
This command specified in Interface Configuration mode only affects a
single interface.
Example
The following example assigns a MAC access group to port 1/g1 with the
name DELL123.
console(config)#interface 1/g1
console(config-if-1/g1)#mac access-group DELL123