OSPF Commands 915
•
vlan-id
— Valid VLAN ID.
•
ip-address
— Valid IP address of the neighbor.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following examples display information about OSPF neighbors on the
specified Ethernet and IP interfaces.
console #show ip ospf neighbor 10.1.23.50
Interface................................. vlan 20
Neighbor IP Address....................... 10.1.13.50
Interface Index........................... 65
Area Id................................... 0.0.0.1
Options................................... 0x42
Router Priority........................... 1
Dead timer due in (secs).................. 33
Up Time................................... 4 days 12 hrs 56 mins 6
secs
State..................................... Full/DR
Events.................................... 13
Retransmission Queue Length............... 0
Restart Helper Status..................... Helping
Restart Reason............................ Software Restart (1)
Remaining Grace Time...................... 10 sec
Restart Helper Exit Reason................ In Progress