SNMP Commands 1235
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the options for the snmp-server enable traps
command.
console(config)#snmp-server enable traps ?
<cr> Press enter to execute the command.
acl acl
all Enable/Disable all Traps.
authentication To enable the device to send SNMP traps
when authentication fails.
dvmrp dvmrp
link Enable/Disable switch level Link Up/Down
trap flag.
multiple-users Enable/Disable sending traps when multiple
logins active.
ospf Enable/Disable OSPF Traps.
ospfv3 Enable/Disable OSPF Traps.
pim pim
spanning-tree Enable/Disable sending Spanning Tree traps.
snmp-server enable traps authentication
Use the snmp-server enable traps authentication command in Global
Configuration mode to enable the switch to send Simple Network
Management Protocol traps when authentication fails. To disable SNMP
failed authentication traps, use the no form of this command.
Syntax
snmp-server enable traps authentication