Dell show interfaces counters

Ethernet Configuration Commands 299
The displayed port configuration information includes the following:
show interfaces counters
Use the show interfaces counters command in User EXEC mode to display
traffic seen by the interface.
Syntax
show interfaces counters [ethernet interface | port-channel port-channel-
number
]
• interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays traffic seen by the physical interface:
Field Description
Port The port number.
Port Type The port designated IEEE shorthand identifier. For example
1000Base-T refers to 1000 Mbps baseband signaling including both
Tx and Rx transmissions.
Duplex Displays the port Duplex status.
Speed Refers to the port speed.
Neg Describes the Auto-negotiation status.
Admin State Displays whether the port is enabled or disabled.