82 Command Groups
conform-color Specifies for each outcome, the only possible
actions are drop, setdscp-transmit, set-prec-
transmit, or transmit
PCM
C
cos-queue min-bandwidth Specifies the minimum transmission bandwidth
for each interface queue.
GC
and IC
cos-queue strict Activates the strict priority scheduler mode for
each specified queue.
GC
and IC
diffserv Sets the DiffServ operational mode to active. GC
drop Use the drop policy-class-map configuration
command to specify that all packets for the
associated traffic stream are to be dropped at
ingress.
PCM
C
mark cos Marks all packets for the associated traffic
stream with the specified class of service value
in the priority field of the 802.1p header.
PCM
C
mark ip-dscp Marks all packets for the associated traffic
stream with the specified IP DSCP value.
PCM
C
mark ip-precedence Marks all packets for the associated traffic
stream with the specified IP precedence value.
PCM
C
match class-map Adds add to the specified class definition the
set of match conditions defined for another
class.
CMC
match cos Adds to the specified class definition a match
condition for the Class of Service value.
CMC
match destination-address
mac
Adds to the specified class definition a match
condition based on the destination MAC
address of a packet.
CMC
match dstip Adds to the specified class definition a match
condition based on the destination IP address of
a packet.
CMC
match dstip6 adds to the specified class definition a match
condition based on the destination IPv6 address
of a packet.
v6CM
C
Command Description Mode*