Dell interface ethernet, interface range ethernet

Ethernet Configuration Commands 293
interface ethernet
Use the interface ethernet command in Global Configuration mode to enter
the interface configuration mode to configure an Ethernet type interface.
Syntax
interface ethernet interface
• interface — Valid Ethernet port. The full syntax is unit/port.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables port 5/g18 for configuration.
console(config)# interface ethernet 5/g18
interface range ethernet
Use the interface range ethernet command in Global Configuration mode to
execute a command on multiple ports at the same time.
Syntax
interface range ethernet { port-range | all}
• port-range — List of valid ports to configure. Separate non consecutive
ports with a comma and no spaces; use a hyphen to designate a range of
ports. For more detailed information, refer to the Operating on Multiple
Objects (Range) discussion in the Using the CLI chapter.
•
all — All Ethernet ports.