Command Groups 135
no cut-through mode Disables the cut-through mode on the switch. GC
no standby Removes standby configuration in the stack. SG
ping Sends ICMP echo request packets to another
node on the network.
UE
reload Reloads the operating system. PE
set description Associates a text description with a switch in
the stack.
SG
show boot-version Displays the boot image version details. UE
show cut-through mode Show the cut-through mode on the switch. PE
show memory cpu Checks the total and available RAM space on
the switch.
PE
show nsf Shows non-stop forwarding status. PE
show process cpu Checks the CPU utilization for each process
currently running on the switch.
PE
show sessions Displays a list of the open telnet sessions to
remote hosts.
PE
show stack-port Displays summary stack-port information for all
interfaces.
PE
show stack-port
counters
Displays summary data counter information for
all interfaces.
PE
show stack-port diag Displays front panel stacking diagnostics for
each port.
PE
show stack-standby Shows the Standby configured in the stack. UE
show supported
switchtype
Displays information about all supported switch
types.
UE
show switch Displays information about the switch status. UE
show system Displays system information. UE
show system id Displays the service ID information. UE
show tech-support Displays system and configuration information
(for debugging/calls to technical support).
PE
show users Displays information about the active users. PE
Command Description Mode*