692 IGMP Commands
User Guidelines
This command has no user guidelines.
Example
The following example configures 2 seconds as the Maximum Response Time
inserted in VLAN 15’s Group-Specific Queries.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp last-member-query-
interval 20
ip igmp query-interval
Use the ip igmp query-interval command in Interface Configuration mode to
configure the query interval for the specified interface. The query interval
determines how fast IGMP Host-Query packets are transmitted on this
interface.
Syntax
ip igmp query-interval
seconds
no ip igmp query-interval
•
seconds
— Query interval. (Range: 1-3600)
Default Configuration
The default query interval value is 125 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a 10-second query interval for VLAN 15.
console(config)#interface vlan 15