Dell ipv6 pimsm register-threshold, ipv6 pimsm rp-address

IPv6 Multicast Commands 757
Example
console(config-if-vlan3)#ipv6 pimsm join-prune-
interval 90
ipv6 pimsm register-threshold
Use the ipv6 pimsm register-threshold command to configure the Register
Threshold rate for the RP router to switch to the shortest path. Use the "no"
form of this command to set the register threshold rate to the default.
Syntax
ipv6 pimsm register-threshold threshold
no ipv6 pimsm register-threshold
• threshold—The threshold rate (Range: 0–2000 Kbps).
Default Configuration
The default threshold rate is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm register-threshold 250
ipv6 pimsm rp-address
Use the ipv6 pimsm rp-address command to statically configure the RP
address for one or more multicast groups. The optional keyword override
indicates that if there is a conflict, the RP configured with this command
prevails over the RP learned by BSR. Use the "no" form of this command to
remove the RP address for one or more multicast groups.