Dynamic ARP Inspection Commands 281
ip arp inspection vlan
Use the ip arp inspection vlan command to enable Dynamic ARP Inspection
on a single VLAN or a range of VLANs. Use the “no” form of this command
to disable Dynamic ARP Inspection on a single VLAN or a range of VLANs.
Syntax
ip arp inspection vlan
vlan-range
[logging]
no ip arp inspection vlan
vlan-range
[logging]
•
vlan-range
— A valid range of VLAN IDs.
•
logging
— Use this parameter to enable logging of invalid packets.
Default Configuration
Dynamic ARP Inspection is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip arp inspection vlan 200-300
console(config)#ip arp inspection vlan 200-300
logging