
1filler bracket
2alignment bar
3alignment guide
4retention arm
7.If you are replacing an AGP card, align the AGP card guide with the base and press down on the indentation until the guide stops at the top of the AGP card.
1base
2AGP retention spring
3indentation
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.
8.Connect any cables that should be attached to the card.
See the documentation for the card for information about the card's cable connections.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
9.Close the computer cover, reconnect the computer and devices to electrical outlets, and turn them on.
10.If you installed a sound card: