1hard-drive cable

2power cable

Serial ATA Drive

1power cable

2serial ATA hard-drive cable

7.Check all connectors to be certain that they are properly cabled and firmly seated.

8.Close the computer cover.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

9.Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

10.If the drive you just installed is the primary drive, insert a bootable floppy disk into drive A.

Page 56
Image 56
Dell PRECISION WORKSTATION 450 manual Serial ATA Drive