144 Troubleshooting Your System
2
Check the appropriate indicator on the NIC connector. See "NIC Indicator
Codes" on page21.
• If the link indicator does not light, check all cable connections.
• If the activity indicator does not light, the network driver files might
be damaged or missing.
Remove and reinstall the drivers if applicable. See the NIC's
documentation.
• Change the autonegotiation setting, if possible.
• Use another connector on the switch or hub.
If you are using a NIC card instead of an integrated NIC, see the
documentation for the NIC card.
3
Ensure that the appropriate drivers are installed and the protocols are
bound. See the NIC's documentation.
4
Enter the System Setup program and confirm that the NICs are enabled.
See "Using the System Setup Program" on page47.
5
Ensure that the NICs, hubs, and switches on the network are all set to the
same data transmission speed. See the network equipment
documentation.
6
Ensure that all network cables are of the proper type and do not exceed the
maximum length. See Network Cable Requirements in your
Getting
Started Guide
.
If the problem persists, see "Getting Help" on page 175.
Troubleshooting a Wet System
Problem
• Liquid spilled on the system.
• Excessive humidity.