Dell R805 Code update, Loaded for Processor n, Write fault Write fault on selected drive

Table 1-7. System Messages (continued)

Message	Causes	Corrective Actions
Warning! No micro	Micro code update failed.	Update the BIOS firmware.
code update		See "Getting Help" on
loaded for		page 175.
processor n

Warning: One or more faulty DIMMs found on CPUn

Warning: The installed memory configuration is not optimal. For more information on valid memory configurations, please see the system documentation on the technical support web site.

Faulty or improperly seated memory module(s) used by CPUn.

Invalid memory configuration. The system will run but with reduced functionality.

See "Troubleshooting System Memory" on page 150.

Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 114. If the problem persists, see "Troubleshooting System Memory" on page 150.

Write fault

Write fault on selected drive

Faulty USB device, USB medium, optical drive assembly, hard drive, or hard- drive subsystem.

See "Troubleshooting a USB Device" on page 143, "Troubleshooting an SD Card or Internal USB Key" on page 152, and "Troubleshooting a Hard Drive" on page 155.

NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary" on page 177.

44

About Your System