About Your System 23
Table 1-6. LCD Status Messages
Code Text Causes Corrective Actions
N/A SYSTEM NAME
A 62-character string that
can be defined by the user in
the System Setup program.
The
SYSTEM NAME
displays under the following
conditions:
• The system is powered on.
• The power is off and
active errors are displayed.
This message is for
information only.
You can change the
system ID and name in
the System Setup
program. See "Using the
System Setup Program"
on page47.
E1000 FAILSAFE,
Call Support
Check the system event log
for critical failure events.
See "Getting Help" on
page175.
E1114 Temp Ambient Ambient system
temperature is out of
acceptable range.
See "Troubleshooting
System Cooling
Problems" on page149.
E1118 CPU Temp
Interface
The BMC is unable to
determine theCPU(s)
temperature status.
Consequently, the BMC
increases theCPU fan speed
to maximum
asa precautionary measure.
Turn off power to the
system and restart the
system. If the problem
persists, see "Getting
Help" on page175.
E1210 CMOS Batt CMOS battery is missing, or
the voltage is out of
acceptable range.
See "Troubleshooting the
System Battery" on
page147.
E1211 ROMB Batt RAID battery is either
missing, bad, or unable to
recharge due to thermal
issues.
Reseat the RAID battery
connector. See "RAID
Battery" on page87, and
"Troubleshooting System
Cooling Problems" on
page149.
E1214
E1216
E1217
##
PwrGd Specified voltage regulator
has failed.
See "Getting Help" on
page175.