98 Installing System Components
Figure 3-16. Removing and Installing the Processor Fan Bracket
Replacing the Fan Bracket1
Lower the fan bracket down onto the bracket base so that the tabs and
hooks under the bracket fit correctly into the bracket base. See Figure3-16.
2
With the bracket properly engaged, slide the bracket to lock it in place.
3
Replace the fans in the fan bracket. See "Replacing a Cooling Fan" on
page83.
4
Reinstall the cooling shrouds. See "Cooling Shrouds" on page94.
5
Reinstall the expansion-card riser 2. See "Replacing Expansion-Card Riser
2" on page 101.
6
Reinstall the expansion cards from riser 2. See "Installing an Expansion
Card" on page91.
7
If applicable, reinstall the SAS controller daughter card. See "Installing a
SAS Controller Daughter Card" on page84.
8
Close the system. See "Closing the System" on page 71.
1 release latch 2 fan bracket
2
1