Additionally, for Microsoft® Windows® operating systems, you will need to install the AMD PowerNow!™ driver to enable this feature. The driver is available on the Dell OpenManage™ Service and Diagnostic CD provided with your system, and at support.dell.com.

Integrated Devices Screen

Table 2-5 lists the options and descriptions for the information fields that appear on the Integrated Devices screen.

Table 2-5. Integrated Devices Screen Options

Option

Description

 

 

Integrated SAS/RAID

Enables or disables the integrated SAS controller.

Controller

 

(Enabled default)

 

Optical Drive Controller

Enables or disables the integrated optical drive controller.

(On default)

 

User Accessible USB Ports

Enables or disables the system’s user accessible USB

(All Ports On default)

ports. Options are All Ports On, Only Back Ports On, and

 

All Ports Off.

Internal USB Port

Enables or disables the system’s internal USB port.

(On default)

 

SD Card Port

Enables or disables the system’s internal SD card port.

Embedded Gb NICx

Enables or disables the system's integrated NIC. Options

(NIC1 default: Enabled

are Enabled, Enabled with PXE, Enabled with iSCSI

with PXE;

Boot, and Disabled. PXE support allows the system to

Other NICs: Enabled)

boot from the network. Changes take effect after the

 

system reboots.

MAC Address

Displays the MAC address for the integrated 10/100/1000

 

NIC. This field does not have user-selectable settings.

Capability Detected

Displays the NIC features provided by the LOM NIC

 

hardware key installed in the TOE_KEY socket on the

 

system board.

 

NOTE: Some LOM features may require the installation of

 

an additional driver.

54

Using the System Setup Program

Page 54
Image 54
Dell R805 owner manual Integrated Devices Screen