Dell R805 E201C SMI Init, E201E Post Mem Test Bios Post memory test failure, E2020 CPU Config

Table 1-6. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E201C	SMI Init	System management	See "Getting Help" on
		interrupt (SMI)	page 175.
		initialization failure.

E201D Shutdown Test BIOS shutdown test failure.

E201E POST Mem Test BIOS POST memory test failure.

E201F DRAC Config Dell remote access controller (DRAC) configuration failure.

E2020	CPU Config	CPU configuration failure.
E2021	Memory	Incorrect memory
	Population	configuration. Memory
		population order incorrect.
E2022	POST Fail	General failure after video.
E2110	MBE DIMM # &	One of the DIMMs in the
	#	set implicated by "# & #"
		has had a memory multi-bit
		error (MBE).

See "Getting Help" on page 175.

See "Troubleshooting System Memory" on page 150. If problem persists, see "Getting Help" on page 175.

Check screen for specific error messages.

Ensure that DRAC cables and connectors are properly seated. If problem persists, see your DRAC documentation.

Check screen for specific error messages.

Check screen for specific error messages. See "Troubleshooting System Memory" on page 150.

Check screen for specific error messages.

See "Troubleshooting System Memory" on page 150.

32

About Your System