w w w . d e l l . c o m s u p p o r t . d e l l . c o m

cfgNetTuningIpSubnetsAreLocal (Read/Write)

NOTE: To modify this property, you must have Configure DRAC 4 permission.

Legal Values

1 or 0

Default

1

Description

Packets addressed to subnets of the local net do not go to the gateway.

Tuning the DRAC 4 for Satellite Connectivity

The racadm CLI may be used to modify the network tuning properties of the DRAC 4. It is also possible to use the racadm.cfg file to modify these properties (similar to the manner in which

.ini files are used).

racadm config -g cfgNetTuning -o cfgNetTuningNicMtu <value> racadm config -g cfgNetTuning -o cfgNetTuningIpTtl <value> racadm config -g cfgNetTuning -o cfgNetTuningIpReassTtl <value> racadm config -g cfgNetTuning -o cfgNetTuningTcpSrttBase <value> racadm config -g cfgNetTuning -o cfgNetTuningTcpSrttDflt <value> racadm config -g cfgNetTuning -o cfgNetTuningTcpReXmtMin <value> racadm config -g cfgNetTuning -o cfgNetTuningTcpReXmtMax <value> racadm config -g cfgNetTuning -o cfgNetTuningTcpMsl <value>

where <value> is obtained from Table B-2.

Table B-2. DRAC 4 Properties for Satellite Connectivity

Property

Normal Value

Satellite Value

 

 

 

cfgNetTuningNicMtu

0x5dc

0x1f4

cfgNetTuningIpTtl

0x40

0x80

cfgNetTuningIpReassTtl

0x3c

0x78

cfgNetTuningTcpSrttBase

0

0x100

cfgNetTuningTcpSrttDflt

0x6

0x180

208

DRAC 4 Property Database Group and Object Definitions

Page 208
Image 208
Dell Remote Access Controller 4 Firmware Version 1.30 CfgNetTuningIpSubnetsAreLocal Read/Write, Ini files are used, 208