Dell Remote Access Controller 4 Firmware Version 1.30 manual Sslcsrgen

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Table A-33. setrac Subcommand Options (continued)

-T	Gets the OS type from the managed system and writes it to the DRAC 4. This parameter
	is available for viewing using the getsysinfo command and under the object ID interface
	using config/getconfig as [ifcRacManagedNodeOs] ifcRacMnOsOsType.
-d	The -d, or display option, allows the user to get the Hostname, OS name, and OS type
	from the managed system and display these items only. Parameters are not written to the
	DRAC 4. If the -d option is typed along with other options, then those parameters are
	displayed only.

Output

A message is displayed indicating the values obtained from the managed system, and if they are being written to the DRAC 4 or only displayed.

Examples

•racadm setrac -d — Only the parameter values are displayed.

•racadm setrac -h — The UTC time and managed system name are taken from the managed system and written to the DRAC 4.

sslcsrgen

NOTE: To use this command, you must have Configure DRAC 4 permission.

Table A-34 describes the sslcsrgen subcommand.

Table A-34. sslcsrgen

SubcommandDescription

sslcsrgen Generates and downloads the SSL CSR.

Synopsis

racadm sslcsrgen [-g] [-u] [-f <filename>]

racadm sslcsrgen -s

Description

The sslcsrgen subcommand is used to generate the CSR and download it to a file, <filename>.

174

racadm Subcommand Man Pages