Dell Remote Access Controller 4 Firmware Version 1.30 manual 139, Specific object

Example:

racadm config -g cfgUserAdmin -o cfgUserAdminUserName -i 2 john racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 2 123456

A user name "john" with the password of "123456" is created. This user name and password can now be used to log into the Web-based remote access interface. You can verify this using either of the following two commands:

racadm getconfig -u john

racadm getconfig -g cfgUserAdmin -i 2

Deleting a DRAC 4 User

All users must be deleted manually. You cannot delete users by specifying them in a racadm.cfg file.

To delete the user "john" created in the previous example, type the following command line:

racadm config -g cfgUserAdmin -o cfgUserAdminUserName -i <index>

""

A null string of double quote characters("") indicates to the DRAC 4 to delete the index for the specified group.

Adding a DRAC 4 User With Alerting Capabilities

To add a DRAC 4 user that is able to receive email and SNMP traps, first locate an available DRAC 4 user index by performing the steps in "Before Adding a DRAC 4 User." The following example has an available user index at index 2.

NOTE: See "DRAC 4 Property Database Group and Object Definitions" for details about each

specific object.

racadm config -g cfgUserAdmin -o cfgUserAdminUserName -i 2 john

racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 2 123456

racadm config -g cfgUserAdmin -o cfgUserAdminEmailAddress -i 2 "<email address>"

racadm config -g cfgUserAdmin -o cfgUserAdminEmailCustomMsg -i 2 "RAC Alert Email Test"

racadm config -g cfgUserAdmin -o cfgUserAdminEmailEnable -i 2 1

racadm config -g cfgUserAdmin -o cfgUserAdminAlertFilterRacEventMask -i 2 0x0

racadm config -g cfgUserAdmin -o cfgUserAdminAlertFilterSysEventMask -i 2 0x0

Using the serial and racadm Commands

139