Table B-2. DRAC 4 Properties for Satellite Connectivity (continued)

Property

Normal Value

Satellite Value

 

 

 

cfgNetTuningTcpReXmtMin

0

0

cfgNetTuningTcpReXmtMax

0x80

0x400

cfgNetTuningTcpMsl

0x3c

0xf0

 

 

 

NOTICE: Although you can configure these parameters, it is recommended that you only use the settings described here. Other settings may adversely effect the DRAC 4's ability to communicate with other network nodes.

Following the modification of the network tuning, the DRAC 4 must be reset for the new tuning values to take effect. After the DRAC 4 has been reset, it should be available for use in a normal or satellite network configuration.

cfgOobSnmp

The group contains parameters to configure the SNMP agent and trap capabilities of the DRAC 4.

One instance of the group is allowed. The following subsections describe the objects in this group.

cfgOobSnmpAgentCommunity (Read/Write)

NOTE: To modify this property, you must have Configure DRAC 4 permission.

Legal Values

A string of up to 31 ASCII characters.

Default

public

Description

Use this to modify the SNMP Community Name.

cfgOobSnmpTrapsEnable (Read/Write)

NOTE: To modify this property, you must have Configure DRAC 4 permission. This object requires a DRAC 4 reset before it becomes active.

Legal Values

Boolean, either 1 or 0 (TRUE or FALSE)

Default

1

DRAC 4 Property Database Group and Object Definitions

209

Page 209
Image 209
Dell Remote Access Controller 4 Firmware Version 1.30 manual CfgOobSnmpAgentCommunity Read/Write, 209