Dell Remote Access Controller 4 Firmware Version 1.30 manual Virtual Media Configuration Options

Table 2-1. DRAC 4 IDE Option ROM Utility Properties (continued)

PropertiesDescription

DNS Configuration Options

Servers from DHCP The available settings are Disabled and Enabled. Press <u> to toggle the setting. The default setting is Disabled, which indicates that the DRAC 4 is using preset static IP addresses. When this option is selected, the DHCP server provides the DNS server IP addresses.

If Use DHCP (described earlier in this table) is set to Disabled, this option is grayed out and you cannot modify this field.

Static DNS Server 1: Indicates the preset static IP address of the first DNS server that the DRAC 4 uses if Servers from DHCP is disabled. The default is 192.168.0.5. Press <1> to change this address. If Servers from DHCP is Enabled, this option is grayed out and you cannot modify this field.

Static DNS Server 2: Indicates the preset static IP address of the second DNS server that the DRAC 4 uses if Servers from DHCP is disabled. The default is 192.168.0.6. Press <2> to change this address. If you do not have a second DNS server, you may enter

0.0.0.0for the IP address. If Servers from DHCP is Enabled, this option is grayed out and you cannot modify this field.

Register RAC Name The available settings are Disabled and Enabled. Press <c> to toggle the setting. The default setting is Disabled. The default RAC name is RAC-service tag, where service tag is the service tag number of the Dell server (for example, RAC- EK00002). When this option is selected, the RAC name is displayed. You can modify the RAC name only when toggling from the Disabled setting. If this option is set to Enabled, you can modify the RAC name by pressing <c> twice.

Static Domain The default setting is Disabled. The default static domain name is

NameMYDOMAIN. Press <f> to toggle the setting. When this option is selected, the static domain name is displayed. You can modify the domain name only when toggling from the Disabled setting by pressing <f>. However, if Use DHCP (described earlier in this table) is set to Disabled, you cannot set Static Domain Name to Disabled. If Register RAC Name is Disabled, this option is grayed out and you cannot modify this field.

Virtual Media Configuration Options

Virtual Media is: Indicates whether Virtual Media is enabled or disabled. Press <e> to toggle the setting.

Installing and Setting Up the DRAC 4

37