Dell Remote Access Controller 4 Firmware Version 1.30 manual Creating an Association Object

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

4Select Privilege Object.

5Click OK.

6Right-click the privilege object that you created, and select Properties.

7Click the RAC 4 Privileges tab and select the DRAC 4 privileges that you want the user to have (for more information, see Table 4-2).

Creating an Association Object

The Association Object is derived from a Group and must contain a Group Type. The Association Scope specifies the Security Group Type for the Association Object. When you create an Association Object, you must choose the Association Scope that applies to the type of objects you intend to add. Selecting Universal, for example, means that association objects are only available when the Active Directory Domain is functioning in Native Mode or above.

1In the Console Root (MMC) window, right-click a container.

2Select New → Dell RAC Object. This opens the New Object window.

3Type a name for the new object.

4Select Association Object.

5Select the scope for the Association Object.

6Click OK.

Adding Objects to an Association Object

By using the Association Object Properties window, you can associate users or user groups, privilege objects, and RAC devices or RAC device groups.

NOTE: When using Windows 2000 mode or higher, you must use Universal Groups to span domains with your users or RAC objects.

You can add groups of Users and RAC devices. Creating Dell-related groups is done the same way you create other groups.

To add users or User Groups:

1Right-click the Association Object and select Properties.

2Select the Users tab and click Add.

3Type the user or User Group name and click OK.

Click the Privilege Object tab to add the privilege object to the association that defines the user’s or user group’s privileges when authenticating to a RAC device.

NOTE: You can add only one privilege object to an association object.

96

Using the DRAC 4 With Microsoft® Active Directory