Dell Remote Access Controller 4 Firmware Version 1.30 System-Generated Alert Mask Definitions

Table B-3. DRAC 4-Generated Event Mask Bit Definitions

Bits	Data	Type
28–31	DRAC 4 undefined	reserved
24–27	DRAC 4 miscellaneous alerts	<Miscmask>
20–23	DRAC 4 BMC communication alerts	<BMCmask>

where <bmcMask> has the following bit definitions:

•Bit-0: 1 = Send alert for DRAC 4 communication with BMC and lost or restored communication between the DRAC 4 and BMC.

•Bit-1: 1 = Send alert for DRAC 4 lost communication with BMC.

•Bit-2: Reserved.

•Bit-3: Reserved.

Examples

•If you want to define alerts for the following:

–Critical voltage or temperature sensors

–Lost communication with the BMC

then the event mask property value to use is 0x02244444. The following command sets this property value:

racadm -g cfgUserAdmin -o cfgUserAdminAlertFilterRacEventMask -i1 0x2244444

•If you want to define alerts for the following:

–Critical events

–System power off

–Watchdog timer hang

then the event mask property value to use is 0x00064444. The following command sets this property value:

racadm -g cfgTraps -o cfgTrapsFilterSysEventMask -i1 0x00064444

System-Generated Alert Mask Definitions

The cfgTraps cfgTrapsFilter {Rac, Sys} EventMask properties are an unsigned 32-bit integer property that holds the filter information for managed-system generated events. The bit definitions in Table B-4 apply.

DRAC 4 Property Database Group and Object Definitions

221