Dell Remote Access Controller 4 Firmware Version 1.30 manual TtyS0

Table 3-2. Sample File: /etc/innitab (continued)

l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6

#Things to run in every runlevel. ud::once:/sbin/update

#Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now

#When our UPS tells us power has failed, assume we have a few

#minutes of power left. Schedule a shutdown for 2 minutes from now.

#This does, of course, assume you have power installed and your

#UPS is connected and working correctly. pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"

#If power was restored before the shutdown kicked in, cancel it. pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"

#Run gettys in standard runlevels

co:2345:respawn:/sbin/agetty -h -L 57600 ttyS0 vt100 1:2345:respawn:/sbin/mingetty tty1 2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/mingetty tty5 6:2345:respawn:/sbin/mingetty tty6

#Run xdm in runlevel 5

#xdm is now a separate service x:5:respawn:/etc/X11/prefdm -nodaemon

Edit the file /etc/securetty, as follows:

Add a new line, with the name of the serial tty for COM1:

ttyS0

See the sample file, which shows the addition of the new line.

Configuring the DRAC 4 to Use a Serial or Telnet Text Console

47