w w w . d e l l . c o m s u p p o r t . d e l l . c o m

CD/DVD Device or Image File

-c<device-name> <image-file>

This parameter specifies the device or file to supply the virtual CD/DVD-ROM media:

<image-file> is the filename (including path) of a valid ISO-9660 image file

Example:

Windows operating system: -c c:\temp\mydvd.img

Linux operating system: -c /tmp/mydvd.img

<device-name> on Windows systems: a valid CD/DVD drive letter

<device-name> on Linux systems: a valid CD/DVD device special filename

Example:

Windows operating system: -c d:\

Linux operating system: -c /dev/cdrom

Omit this parameter from the command line if no CD/DVD media is to be virtualized. If an invalid value is detected, an error message is listed and the command terminates.

Version Display Switch

-v

This parameter is used to display the version of the VM-CLI utility.

If no other nonswitch options are provided, the command terminates without error.

Help Display Switch

-h

This parameter is used to display a summary of the VM-CLI utility parameters.

If no other nonswitch options are provided, the command terminates without error.

NOTE: Specify at least one media type (floppy/disk or CD/DVD) with the command, unless only switch options are provided. Otherwise, an error message displays and the command terminates with an error.

120

Configuring and Using Virtual Media

Page 120
Image 120
Dell Remote Access Controller 4 Firmware Version 1.30 manual CD/DVD Device or Image File, Cdevice-name image-file