Dell Remote Access Controller 4 Firmware Version 1.30 manual Configuring User email Alerts

Table 4-2. User Group Permissions

User Group	Permissions Granted
Administrator	Login to DRAC 4, Configure DRAC 4, Configure Users, Clear Logs, Execute
	Server Control Commands, Access Console Redirection, Access Virtual Media,
	Test Alerts, Execute Diagnostic Commands, and receive email alerts
	(if Enabled)
Power User	Login to DRAC 4, Clear Logs, Execute Server Control Commands, Access
	Console Redirection, Access Virtual Media, Test Alerts, and receive email alerts
	(if Enabled)
Guest User	Login to DRAC 4, and receive email alerts (if Enabled)
email Alerts Only	Receive email alerts (if Enabled)
Custom	Allows you to select any combination of the following permissions: Login to
	DRAC 4, Configure DRAC 4, Configure Users, Clear Logs, Execute Server
	Action Commands, Access Console Redirection, Access Virtual Media, Test
	Alerts, Execute Diagnostic Commands, and receive email alerts (if Enabled)

Configuring User email Alerts

Enabling User email Alerts

Use the information in Table 4-3 to enable email alerts.

Table 4-3. Enable email Alert Properties

Property	Description
Enable email Alerts	Enables the DRAC 4 email alerts feature and allows you to select which
	events, according to their severity, will cause an email alert to be sent.
email Address	Allows you to specify the email address to which alerts are sent.
Message	Allows you to specify the email message text.

Configuring email Alerts by Severity

The information under email Alerts in the Web-based interface enables you to select which events, according to their severity, will cause an email alert to be sent. Select the severity of the temperature, voltage, fan, or miscellaneous sensor for which you want an email alert generated. You can specify three severities: Informational (lowest severity), Warning (medium severity), and Severe (highest severity). Alerts will be sent to the email address you typed in

Enabling User email Alerts. For information about each email alert severity type, see Table 4-4.

Managing and Recovering a Remote System

59