Dell Remote Access Controller 4 Firmware Version 1.30 Alert Filter Properties, 222, StatMask

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Table B-4. System-Generated Alert Mask Bit Definitions

Bits	Data	Type
28–31	System undefined	reserved
24–27	System undefined	reserved
20–23	System undefined	reserved
16–19	System status alerts	<statMask>
12–15	System miscellaneous sensor	<senMask>
8–11	System fan sensors	<senMask>
4–7	System voltage sensors	<senMask>
0–3	System temperature sensors	<senMask>

where <senMask> has the following bit definitions:

•Bit-0: 1 = Send alert for informational events (such as a return to lower severity range or normal).

•Bit-1: 1 = Send alert for warning (noncritical) events.

•Bit-2: 1 = Send alert for critical events.

•Bit-3: Reserved.

where <statMask> has the following bit definitions:

•Bit-0: 1 = Send alert when system transitions to a powered-on state.

•Bit-1: 1 = Send alert when system transitions to a powered-off state.

•Bit-2: 1 = Send alert when watchdog timer detects a system hang.

•Bit-3: Reserved.

Alert Filter Properties

The alert filter property group ID is cfgUserAdmin. The object IDs are shown in Table B-5.

Table B-5. Alert Filter Property Group and Object IDs

GroupID	Object ID	Object Default Value
cfgUserAdmin	cfgUserAdminPageEmailEnable	FALSE
cfgUserAdmin	cfgUserAdminPageEmailAddress	""
cfgUserAdmin	cfgUserAdminPageEmailCustomMsg	""
cfgUserAdmin	cfgUserAdminAlertFilterRacEventMask	0x777777
cfgUserAdmin	cfgUserAdminAlertFilterSysEventMask	0x777777
cfgRemoteHosts	cfgRhostsSmtpServerIpAddr	0.0.0.0

222

DRAC 4 Property Database Group and Object Definitions