Dell YT583 manual 184

NOTE: Align the memory module carefully to ensure that it is facing the correct direction; FBDs on memory riser cards 1 and 2 face a different direction than those on riser cards 3 and 4.

9Align the notch on the bottom of the module with the crossbar in the connector.

	2
1
			3
			4
1	cutouts (2)	2	memory module
3	notch	4	crossbar

NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the module.

10Insert the module into the connector until the module snaps into position.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

184

Adding and Replacing Parts