Dell YT583 manual 193

14Insert the riser cards into the connectors until both riser cards snap into position.

NOTE: If a memory-riser power cable is not plugged in, the system will not boot.

15Connect the power cables to memory riser cards 1 and 2.

NOTICE: The memory shroud holds the (optional) memory risers in place; its thumbscrews must be sufficiently tight in order to secure the risers and to avoid damage.

16Replace the memory shroud. Tighten the thumbscrews until the memory shroud is well secured and will not shift when the computer is moved.

1 2

1 memory shroud 2 thumbscrews (2)

17Replace the computer cover (see "Replacing the Computer Cover" on page 145).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

Adding and Replacing Parts

193