Dell YT583 manual Maintenance

Auto Power Time

Sets time to automatically turn on the computer.

Time is kept in the standard 12-hour format (hours:minutes). Change the startup time by pressing the right- or left-arrow key to increase or decrease the numbers, or type numbers in both the date and time fields.

Low Power Mode

(Off default)

When Low Power Mode is selected, remote wakeup events will no longer power up the computer from Hibernate or Off via the onboard network controller.

Remote	This option allows the system to power up when a Network
Wakeup	Interface Controller (NIC) or Remote Wakeup-capable modem
(Off	receives a wake up signal.
default)	On is the default setting. On w/ Boot to NIC will allow the
	computer to attempt to boot from a network prior to using the
	boot sequence.
	NOTE: Normally, the system can be powered up remotely from
	suspend mode, hibernate mode, or when powered off. When
	Low Power Mode (in the Power Management menu) is enabled,
	the system can only be powered up remotely from Suspend.
Suspend Mode	Sets the computer’s suspend mode. The options are S1, a
	suspend state in which the computer is running in a low-
	power mode, and S3, a suspend state in which the power is
	reduced or turned off for many components, however, system
	memory remains active.
Maintenance
Service Tag	Displays the service tag for your computer.
ASF Mode	Controls ASF management.
	• On = Full ASF 2.0 functionality (RMCP)
	• Alert Only - send ASF messages on event or error
	• Off - all ASF functionality disabled
SERR Message	Some graphics cards require that the SERR message be
(On default)	disabled.

82

System Setup