Dell YT583 manual 191

1

2

3

1	power connectors (4)	2 memory module connectors (4)
3	securing clips (2)

7Grasp the memory riser card 3 at each corner and lift memory riser card 3 and attached card 4 from the DIMM_3 and DIMM_4 memory module connectors on the system board.

If a card is difficult to remove, gently ease it back and forth to remove it from the connector.

CAUTION: Fully-buffered memory modules may become very hot during normal operation. Ensure that memory modules have had sufficient time to cool before you touch them.

8Press out the securing clip at each end of the module connector on the memory riser card from which you are removing memory.

9Grasp the module and pull up to lift the memory module from the memory riser card.

If a module is difficult to remove, gently ease it back and forth to remove it from the connector.

Adding and Replacing Parts

191