Dell YT583 manual 159

1

2

1 heat-sink assembly 2 captive screw housing (4)

NOTICE: The memory shroud holds the (optional) memory risers in place; its thumbscrews must be sufficiently tight in order to secure the risers and to avoid damage.

15Replace the memory shroud and memory fan. Tighten the thumbscrews until the memory shroud is well secured and will not shift when the computer is moved.

16Ensure that all connectors are properly cabled and firmly seated.

17Replace the computer cover (see "Replacing the Computer Cover" on page 145).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

18Connect the computer and devices to electrical outlets, and turn them on.

Adding and Replacing Parts

159