Dell YT583 manual 206

NOTICE: Do not route card cables behind the cards. Cables routed behind the cards could cause damage to the equipment.

8Connect any cables that should be attached to the card.

See the documentation for the card for information about the card’s cable connections.

9Rotate the card retainer back into its original position; push its tip so that its tab clicks into place.

1

2

1 release tab 2 card retainer

10Reconnect the data cable to each installed hard drive.

11Reconnect the hard drive power cable to each installed hard drive.

12Ensure that all connectors are properly cabled and firmly seated.

13Press the card retention device back into its original position; push it down until it clicks into place.

206

Adding and Replacing Parts