Dell YT583 manual Removing the Optional Graphics Riser Card, 223

1

2

3

1	graphics card bridge (not present 2 power connectors (2)
	on some dual-graphics
	configurations)
3	dual-PCI Express graphics cards

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer.

16Replace the computer cover (see "Replacing the Computer Cover" on page 145), reconnect the computer and devices to electrical outlets, and then turn them on.

Removing the Optional Graphics Riser Card

NOTE: To upgrade to or downgrade from a dual-graphics configuration (with the graphics riser card), you will need additional parts that can be ordered from Dell. See "Contacting Dell" on page 287.

1Follow the procedures in "Before You Begin" on page 139.

Adding and Replacing Parts

223