Diskette

Enables and disables the floppy drives and sets read

Drive

permission for the internal floppy drive. Off disables all

(Internal

floppy drives. USB disables the internal diskette drive and

enables a USB floppy drive, if the USB controller is enabled

default)

and a USB drive is connected. Internal enables the internal

 

 

floppy drive. Read Only enables the internal drive controller

 

and allows the internal floppy drive read-only permission.

 

NOTE: Operating systems with USB support will recognize USB

 

floppy drives regardless of this setting.

 

 

SATA 0

Enables (On) or disables (Off) a SATA drive.

through 2

Displays the Controller type (SATA), Port number the drive

(On default)

is using, Drive ID number, and Capacity.

SATA

Determines the integrated SATA controller's operating mode,

Operation

which can be either AHCI or ATA.

 

(AHCI

 

default)

 

SMART

Controls whether errors for integrated drives are reported

Reporting

during startup.

(Off

 

default)

 

Onboard Devices

Integrated

NIC

(On default)

Enables or disables the integrated NIC controller. Settings are On, Off, On w/RPL, or On w/ PXE. When the On w/ PXE or the On w/RPL setting is active, if a boot routine is not available from the network server, the computer attempts to boot from the next device in the boot sequence list.

Integrated

Enables (On) or disables (Off) the onboard

Audio

audio controller. You can also select Auto

(On default)

to use the add-in Audio controller.

1394

Enables (On) or disables (Off) a 1394 controller.

Controller

 

System Setup

77

Page 77
Image 77
Dell YT583 manual Ahci