1

2

1 release tab

2 card retainer

NOTICE: Ensure that you release the securing tab to unseat the card. If the card is not removed correctly, the system board may be damaged.

5Remove the card:

a If necessary, disconnect any cables connected to the card.

b If the card is full-length, press the release tab on the end of the alignment guides on the fan bracket.

c If the connector has a release tab, press the release tab as you grasp the card by its top corners, and ease it out of its connector.

6If you are removing the card permanently, install a filler bracket in the empty card-slot opening.

NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer.

7Before you rotate the card retainer back into place, ensure that:

204

Adding and Replacing Parts

Page 204
Image 204
Dell YT583 manual 204