1

4

3

2

1

sliding-plate lever

2

sliding-plate

3

drive panel

4

drive-panel tabs

4Pivot the drive panel outward and lift it from its side hinges.

5Set the drive panel aside in a secure location.

Removing a Drive-Panel Insert

NOTICE: Drive-panel inserts may contain screws on the inside. You can attach the screws to new drives that do not have any screws.

1Remove the drive panel (see "Removing the Drive Panel" on page 246).

NOTICE: To avoid breaking the drive-panel insert tab, do not pull the insert more than approximately 1 cm (½ inch) away from the drive panel before sliding the tab out of the slot.

Adding and Replacing Parts

247

Page 247
Image 247
Dell YT583 manual Removing a Drive-Panel Insert, 247