2Remove the computer cover (see "Removing the Computer Cover" on page 141).

3Remove the memory shroud by loosening its two thumbscrews and lifting it from the computer.

1

2

 

3

1 memory shroud

2 thumbscrews (2)

3memory fan (only present on systems without memory riser cards)

4Lift to remove the memory risers, if installed.

5If a graphics riser card is installed, remove it: a Remove its four screws.

b Disconnect its power cable.

c Move it slightly up and to the right at an angle to free it from the card fan and the memory-riser support structure.

d Set the riser aside.

272

Adding and Replacing Parts

Page 272
Image 272
Dell YT583 manual 272