Dell YT583 manual 212

1 2

	3
1	PCI Express x16 card	2	securing tab
3	PCI Express x16 card slot

8If you are replacing the card, see "Installing PCI Express Graphics Cards in a Dual Configuration" on page 215.

If you are not replacing the card, install a filler bracket in the empty card- slot opening.

NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer.

NOTE: The graphics card bridge (not present on all dual-graphics configurations) is unnecessary in a single card configuration.

9Before you rotate the card retainer back into place, ensure that:

•The tops of all cards and filler brackets are flush with the alignment bar.

•The notch in the top of each card or filler bracket fits around the alignment guide.

NOTE: For extra security, remove the alignment guide (an upside-down screw) and screw it in right side up to secure a card.

212

Adding and Replacing Parts