Dell YT583 manual Overview, Entering System Setup, System Setup Options

6

System Setup

Overview

Use System Setup as follows:

•To change the system configuration information after you add, change, or remove any hardware in your computer

•To set or change a user-selectable option such as the user password

•To read the current amount of memory or set the type of hard drive installed

Before you use System Setup, it is recommended that you write down the System Setup screen information for future reference.

NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work incorrectly.

Entering System Setup

1Turn on (or restart) your computer.

2When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.

3Once this F2 prompt appears, press <F2> immediately.

NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and then press <F2>. If you press <F2> before you are prompted, this keystroke will be lost.

4If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then, shut down your computer and try again.

System Setup Options

NOTE: Depending on your computer and installed devices, the items listed in this section may not be present or may not appear exactly as listed.

System

System Setup

75