Dell YT583 manual 197

1

2

1 release tab 2 card retainer

5If you are installing a new card, remove the filler bracket to create a card- slot opening. Then continue with step 7.

NOTICE: Ensure that you release the securing tab to unseat the card. If the card is not removed correctly, the system board may be damaged.

6If you are replacing a card that is already installed in the computer, remove the card:

a If necessary, disconnect any cables connected to the card.

b If the card is full-length, press the release tab on the end of the alignment guides on the fan bracket.

c If the connector has a release tab, press the release tab as you grasp the card by its top corners, and ease it out of its connector.

7Prepare the card for installation.

Adding and Replacing Parts

197