Dell YT583 manual 201

1

2

1 card retention device 2 tab

15Ensure that all connectors are properly cabled and firmly seated.

NOTICE: To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.

16Replace the computer cover (see "Replacing the Computer Cover" on page 145), reconnect the computer and devices to electrical outlets, and then turn them on.

17If you installed a sound card:

a Enter system setup, select Integrated Audio, and then change the setting to Off.

b Connect external audio devices to the sound card’s connectors. Do not connect external audio devices to the microphone, speaker/headphone, or line-in connectors on the back panel.

Adding and Replacing Parts

201