Replacing the Chassis Intrusion Switch

1Gently slide the chassis intrusion switch into its slot and reconnect the cable to the system board.

2Replace the computer cover (see "Replacing the Computer Cover" on page 145).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

3Connect your computer and devices to electrical outlets, and turn them on.

Resetting the Chassis Intrusion Detector

1Turn on (or restart) your computer.

2When the blue DELL™ logo appears, press <F2> immediately.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then shut down

62

Securing Your Computer

Page 62
Image 62
Dell YT583 manual Replacing the Chassis Intrusion Switch, Resetting the Chassis Intrusion Detector