ISDN Software Reference for Linux and Windows
336
External Event Indicates:
CCEV_REDIRECT The firmware has reset its call state to
Overlap Sending. The request to redirect was
made by the switch to solicit more out-of-
band digits.
The CCEV_REDIRECT event pertains only
to a Custom BRI 5ESS switch type
configured as the TE (User side). A station
configured as an NT (Network side) may
generate a message, via the cc_SndMsg( )
function, causing this event.
CCEV_RETRIEVECALL A RETRIEVE CALL acknowledge message
was received from terminal equipment. The
indicated terminal equipment requests
reconnection of a call on hold.
This event can only be received by an
application when the application acts as a
network.
CCEV_SERVICE A SERVICE message has been received from
the network.
CCEV_SERVICEACK A SERVICE ACKNOWLEDGE message has
been received from the network.
CCEV_SETCHANSTATE The B channel status was changed as a result
of cc_SetChanState( ) or a network request.
This event occurs on a board level device,
not a channel device.
CCEV_SETUP_ACK A SETUP_ACK message has been received
by the application.
CCEV_STATUS A STATUS message has been received from
the network.
CCEV_STATUS_ENQUIRY A STATUS_ENQ message has been received
from the network.